<menuitem id="pb3fn"></menuitem>
    <font id="pb3fn"></font>

    <menuitem id="pb3fn"><video id="pb3fn"><thead id="pb3fn"></thead></video></menuitem>

        <cite id="pb3fn"><video id="pb3fn"></video></cite>

          <del id="pb3fn"><track id="pb3fn"></track></del>

          <font id="pb3fn"></font>

          當前位置:首頁-新聞資訊

          鋁蜂窩板安裝方式可以選擇哪些?

          來源:http://www.xks99.com/ 發布時間:2024-03-16

          1、吊耳式:

          1. Lug type:

          吊耳式安裝方法則是吊耳和蜂窩鋁板分離式,吊耳單獨加工后連接與蜂窩鋁板的膠縫位置,膠縫適宜寬度為≥12mm,此安裝方法加工非常簡單,安裝也非常的方便。

          The hanging ear installation method is a separation method between the hanging ear and the honeycomb aluminum plate. The hanging ear is separately processed and connected to the adhesive seam position of the honeycomb aluminum plate. The appropriate width of the adhesive seam is ≥ 12mm. This installation method is very simple to process and very convenient to install.

          2、翻邊式:

          2. Flipped edge:

          此安裝方式則是加工蜂窩鋁板時即加工有安裝用翻邊,安裝時只需按位置連接與龍骨及膠縫處即可,適宜膠縫寬度為≥10mm,此方法安裝方便,但加工稍復雜,不適合被用于造型幕墻鋁板。

          This installation method involves processing honeycomb aluminum panels with installation flanges. During installation, simply connect them to the keel and adhesive joints according to their positions. The suitable adhesive joint width is ≥ 10mm. This method is convenient for installation, but slightly complex in processing and not suitable for modeling curtain wall aluminum panels.

          3、勾搭式吊裝:

          3. Hook up lifting:

          勾搭式吊裝主要應用在沒有邊高差及沒有特殊造型的吊頂安裝,安裝以后吊頂整體穩固。對于板輻非常大,面板非常薄的蜂窩鋁板不建議采用這種方式。

          Hook up hoisting is mainly used for the installation of suspended ceilings without edge height differences or special shapes, and the overall stability of the suspended ceiling after installation. This method is not recommended for honeycomb aluminum panels with very large spokes and very thin panels.

          20230511085244839.jpg

          4、Z型掛件吊裝:

          4. Z-shaped pendant lifting:

          Z型掛件吊裝應用非常的廣泛,加工方便,安裝也非常的簡單,吊裝以后還可讓人進行維修,適用于任何造型的吊頂安裝。

          The lifting of Z-shaped pendants is widely used, with convenient processing and simple installation. After lifting, it can also be repaired by people, making it suitable for any type of ceiling installation.

          5、U型掛件式:

          5. U-shaped pendant type:

          采用下方直接掛到龍骨,然后在上人可及處與龍骨固定方式。此吊裝方式很好的解決了普通Z型掛件式在板輻非常寬且龍骨較低無法上人安裝問題。

          Use the method of hanging directly from the bottom to the keel, and then fix it to the keel within reach of the upper person. This lifting method effectively solves the problem of ordinary Z-shaped pendant type plates with very wide spokes and low keels that cannot be installed by people.

          性一交一乱一乱免费看_精品久久黑丝高跟鞋_久久人人操人人爽_国产又大又长又硬又粗视频